Set up NotePerformer 5 in Sibelius or Dorico and hear a first mockup
Install NotePerformer 5, point Sibelius or Dorico at it, and turn a notated score into a first orchestral audio mockup without leaving the notation program.
Written by Software for Music Editorial Team · Music software research and fact-checking
Reviewed by Software for Music Editorial Team
Achievable outcome
The goal is a short orchestral mockup played straight from your score. Sibelius or Dorico holds the notation, NotePerformer 5 performs it with its own orchestral sounds and phrasing, and you export an audio file you can send to a collaborator or a director. Keep the first pass to one cue or one page so you can fix setup problems before you commit to a full score.
This is a notation-playback workflow, not a DAW mockup. NotePerformer reads the score and shapes the performance for you. If you need hand-programmed controller data, stems or a mix against picture, the MuseScore-to-DAW mockup guide covers that route.
Prerequisites
A supported notation program. Wallander Instruments lists NotePerformer 5 support from Sibelius 7.1.3 and Dorico 3.5 (and Finale 27, English version, which this guide doesn't cover). NotePerformer's pages list minimum host versions, not editions. If you're on a free or entry edition such as Dorico SE, Sibelius First or Sibelius Artist, use the free trial to confirm NotePerformer loads in your edition before you buy, or ask NotePerformer through the contact form on its support pages (https://www.noteperformer.com/?page=support_sibelius). Steinberg lists third-party VST support in Dorico SE, Elements and Pro, but not in Dorico for iPad.
A computer that meets NotePerformer's requirements. The purchase page lists macOS 10.9 or later, Windows 7 or later, 4 GB RAM, an Intel Core 2 Duo 2.0 GHz or Apple M1 or faster CPU, and 2 GB of space on the main drive. (The Windows trial page lists 1.5 GB.) Your notation program has its own, usually newer, requirements. For example, Dorico 6 needs Windows 10 version 1809 or later, or macOS 12 or later.
A licence or the trial. NotePerformer 5's single-user licence is $129 USD including EU VAT, and the site describes the licence as perpetual with no subscription. The free 30-day trial runs in one-hour sessions, so you restart the notation program every hour. It can't export audio to disk and stops working after 30 days. You can learn the setup on the trial, but the final audio export in step 8 needs the full version. NotePerformer also offers Rent-to-Own at $10.75 USD a month including EU VAT. After 12 months in a row it becomes a standard perpetual licence, for the same $129 total. Latest version at time of checking: 5.1.2.
Expect a one-second delay. NotePerformer adds a one-second delay to playback. That's how it reads ahead in the score to shape phrasing. It also means ReWire won't work with it, and recording live from a MIDI keyboard during playback needs Dorico, or Sibelius 2019.4 or later.
Install NotePerformer 5
- Download the trial from noteperformer.com, or, if you bought a licence, use the full-version installer from your personal download links. The full version installs over the trial, and the installer replaces older NotePerformer versions.
- Sibelius on Windows: the installer only targets Sibelius's default VST plug-in folders (under
C:\Program Files\Avid\VSTPlugins,C:\Program Files (x86)\Avid\VSTPlugins, or the matchingSibelius Software\VSTPluginsfolders). If you changed Sibelius's plug-in path or installed Sibelius on another drive, point it back to one of those folders and make sure the folder exists before you run the installer. - Dorico on Windows: install Dorico in a folder whose path contains the word "Dorico". NotePerformer's support page warns that Dorico may otherwise fail to load it.
- macOS: if the installer fails unexpectedly, NotePerformer's support page points to Apple's Installer lacking disk permissions (installing from a Dropbox folder is one known cause). Granting Full Disk Access in System Settings fixes it.
First mockup in Sibelius
- Open your score and switch the Playback Configuration to NotePerformer. It appears automatically after installation.
- If you hear nothing, open Audio Engine Options. While you troubleshoot, NotePerformer recommends the Primary Sound Driver (DS) on Windows or Built-in Output (CoreAudio) on Mac, a buffer of at least 1024, a sample rate of 44100 Hz, and Use virtual instruments and effects turned on. General MIDI playback working doesn't prove the audio engine is set up.
- Balance the mixer. NotePerformer follows volume, pan and reverb from the Sibelius mixer, and the settings save with the score. Default volumes vary between instruments, so set them evenly: double-click a volume slider to reset it to 95, or run NotePerformer's included plug-in, which resets every instrument to 95 and each pan to its staff default.
- Decide how much humanizing you want. For dynamics exactly as written, set Espressivo to Meccanico in the Performance dialog. If high notes in a melody come out louder than low ones, Espressivo is the cause.
- Set the room. Change the global reverb by choosing a room type in the Performance dialog: Dry removes reverb, and Small room gives early reflections only. Keep Use reverb ticked.
- Play one page and listen for wrong sounds or flat dynamics. Dynamics and hairpins should sit in voice 1 where possible. If every staff sounds like a trumpet, check that Send program changes is still on in Sibelius's playback preferences.
- Working to picture: because of the one-second delay, NotePerformer recommends starting the video one second into the score from the Timecode and Duration dialog, or giving the video a minus-one-second offset.
- Export audio with the full version. The trial can't write audio to disk. Avid lists PDF and audio export in Sibelius.
First mockup in Dorico
- Make NotePerformer your default playback template in Dorico Preferences. For an existing project, choose Play ▸ Playback Template… and select the NotePerformer template. Instruments and expression maps are assigned for you.
- Open the NotePerformer mixer from Play mode by clicking the e ("edit instrument") button next to the bank. Solo, mute, volume and reverb apply to all NotePerformer instances, and instruments start with orchestral-seating pan positions. Double-click any control to reset it.
- Click an instrument name in the mixer to override its sound, for example to reach a sound Dorico doesn't map or a different drum kit.
- Set unmeasured tremolo speed in Playback Options. NotePerformer recommends 1/8, slightly faster than Dorico's default of 1/5. Slower settings can play as measured tremolo.
- Keep staves separate in playback. If one Solo Player covers several staves, those staves share a MIDI channel, so articulations and dynamics spill across them. Use a separate Solo Player for each staff you want independent.
- If nothing plays at all, review Audio Device Setup in Preferences, then switch to another ASIO driver and back, or change sample rate and back, to reset Dorico's audio engine.
- Export audio with the full version. Steinberg lists WAV and MP3 audio export in Dorico SE, Elements and Pro.
Troubleshooting
- NotePerformer is missing from Sibelius's playback devices. NotePerformer's support page describes resetting the Sibelius audio engine. Close Sibelius and open the Avid folder in your user Library on Mac (
~/Library/Application Support/Avid) or in your roaming AppData folder on Windows. Inside it, open Sibelius, then PlogueEngine, and delete the.cachefiles there. Sibelius rescans plug-ins and the audio interface the next time it starts. Follow the exact steps on NotePerformer's Sibelius support page. - Only "MIDI" devices appear in Sibelius. No audio interface is selected. Choose one in Audio Engine Options.
- Wrong sounds after a manual override in Sibelius. Overriding a sound in the mixer also moves that staff to the first NotePerformer instance. Set the device back to auto straight away.
- Very loud accents in Dorico. Accent and marcato level is a dynamic change set in Dorico's Library ▸ Playback Options, not inside NotePerformer.
- Older Dorico projects with multiple articulations. These need NotePerformer 3.2 or later and a NotePerformer expression map at version 12 or higher.
Material limitations
NotePerformer is built around its own sounds and supported notation hosts. VST3 hosting was discontinued in NotePerformer 5, so it isn't a way to drive a third-party sample library. Some playing techniques depend on what your notation program can express, and the site notes that availability is limited by the notation software.
The one-second delay is part of how it works. It affects live keyboard input and anything that has to sync tightly, such as video. The trial's hourly restart and lack of audio export make it a setup and evaluation tool, not a way to deliver a mockup.
A notation mockup is a fast way to hear orchestration and send a sketch. It doesn't replace a DAW session when you need stems, mixing or a picture-locked delivery.
Documentation-verified note
This guide was assembled from NotePerformer's official purchase, trial and support pages and from Steinberg and Avid documentation, all linked below. We didn't run the software for this article, so it doesn't claim hands-on confirmation of a particular machine's install, playback timing or CPU load. Use the current support pages if a menu or installer has changed.
NotePerformer 5 setup FAQ
Does NotePerformer 5 work with both Sibelius and Dorico?
Yes. Wallander Instruments lists support from Sibelius 7.1.3 and from Dorico 3.5. In Sibelius you switch to the NotePerformer playback configuration, and in Dorico you choose the NotePerformer playback template.
Can I export audio with the NotePerformer trial?
No. The 30-day trial can't export audio to disk and needs the notation program restarted every hour. Exporting the mockup needs the full version.
How much does NotePerformer 5 cost?
The single-user licence is $129 USD including EU VAT, and NotePerformer describes it as perpetual with no subscription. You can also rent to own at $10.75 a month, which becomes a perpetual licence after 12 months in a row, and there's a free 30-day trial.
Why is there a delay when I press play?
NotePerformer adds a one-second delay so it can read ahead in the score and shape the phrasing. It's expected, not a fault.
Can I use NotePerformer 5 in a DAW?
NotePerformer's current compatibility is tied to supported notation programs, and VST3 hosting was discontinued in NotePerformer 5. For a DAW mockup, use a DAW instrument such as BBC Symphony Orchestra Discover.